Projects within the framework of open4innovation
There are 2455 results.
PAT+ - Product Access Technology for Pléiades User Services
Pléiades is a French Earth Observation satellite program carried out in cooperation with Austria, Belgium, Italy, Spain, and Sweden. Pléiades has also achieved the status of a "GMES Contributing Mission". PAT+ is an innovative technology for online data access to the Pléiades Ortho Products covering large geographical areas.
PAT+3 - Product Access Technology for Pléiades User Services (Phase 3)
PAT+ is an innovative software technology for online data access to the Pléiades Ortho Products covering large geographical areas and will be supplied by EOX. A requirements analysis and design study was carried out in previous project phases jointly with the designated Pléiades data distributor, the French company Spot Image. The current status of this development (spring 2010) is that EOX have completed the detailed design and performed the operational readiness review jointly with Spot Image.
PCS - Platform Compliance Study
In this study, we investigate the phenomena of dark patterns and behavioural advertising. The aim is to evaluate, through research, and development, which methods and tools can be used to detect and document violations in the interest of consumer authorities.
PDCA4Future - Feasibility Study for a Climate-Resilient Urban District in Bruck an der Mur through a New Planning and Financing Approach
Using the Hannes-Bammer-Sports Hall as a case study, the PDCA4Future feasibility project in Bruck an der Mur aims to develop an innovative planning and assessment tool. This involves creating renovation and financing models that align climate neutrality goals with sustainable urban planning. The objective is a fact-based and replicable investment decision (renovation vs. new construction).
PEAR – Test facility for energy efficient automation and control of buildings
The energy demand calculated in the design phase often differs from measured values in the actual building operation. This projects reviews building automation and operation by presenting a solution how to assess energy efficiency of control strategies in the fields of air conditioning systems, concrete core activation and free cooling. The results are implemented in the demonstration building "Post am Rochus".
PEB - Plus-Energy-Office
An integrated technical energy plus office concept without additional building costs demonstrates the feasibility of such projects instancing a concrete office project with 50.000 m² floor area in Vienna with economical cost consideration.
PEQBacker: Integrated District Planning - Enabler on the way to a Plus-Energy District
Development of guidelines for the implementation of Plus-Energy District coordination units based on research of success factors, exploration of mission elements of existing structures and consultation of a broad stakeholder group with the goal of increasing the transformation of existing and emerging neighbourhoods toward Plus-Energy Districts.
PERM::ICE
Permafrost in Iceland - Climate Change Impact on Permafrost Development and Resulting Mass Movment Processes
PESI - Paradigm shift in urban energy systems through synergies with industry
Analysis of different options for the use of industrial surplus energies of various shapes (waste heat, waste water, waste) and renewable energy sources in the industrial sector (e.g. solar panels on roof surfaces) in adjacent urban areas, which act as an "energy sponge". Based on real consumption and availability data, a simulation model was created and opportunities for synergies were documented.
PET2More - Biotechnological upcycling of PET plastic waste as a contribution to the gradual reduction of petroleum-based raw material dependency
The aim of the PET2More project is to develop a biotechnological process for upcycling PET plastic monomer waste. To this end, previously unknown and unavailable decarboxylase enzymes for the conversion of terephthalic acid and 2,5-furandicarboxylic acid into valuable chemicals such as benzoic acid and furan-2-carboxylic acid are to be identified, characterized and optimized by means of enzyme engineering.
PH Office - Criterions for energy-efficient office buildings
The passive house standard and energy-efficient building technologies are getting increasingly important for office buildings, too. However, standardisation is not completed on the same level as known from the residential building sector. The project at hand brings in definitions and makes a suggestion on a standardised calculation method for office buildings in passive house quality.
PH-Academy - "Passive house of the future" Academy platform for knowledge transfer between building developers
Builders and developers of residential buildings in low energy and passive house standard were invited to an academically moderated direct exchange of experiences, to turn them into competent users of new technologies.
PHELICITI - A new generation of chips in 3D
A chip that combines the best of two worlds: intelligent electronics meets fast photonics.The one-chip solutions developed by PHELICITI are scalable and can be produced cost effectively.
PHOTOVOLTAIC WATER Solution
Passive House refurbishment facade with integrated photovoltaic modules for direct, current-based warm water preheating. The GIWOG, an energy-conscious and environmentally and socially oriented client, intends to undertake an energy-related modernisation project, which will further optimise energy consumption to be more efficient at an apartment complex in Graz, main street 302-306. The goal is to lower the energy consumption for heating and hot water from the current level of approximately 135 kWh /m²a to approximately 8 kWh /m²a. The planned measures should correspond with an overall energy consumption reduction of approx. 94 %.
PHplusCAD, IT-based efficient Passive house- and Plusenergy house-Planning
Elaboration and programming of a software that reduces effort and time consumption of Passive house and Plusenergy house planning. By developing direct interfaces between CAD-applications and PHplusCAD and interfaces between PHplusCAD and Passivhouse planning tools based on MS Excel the system could be improved and the related working processes alleviated.
PICAM - Planetary Ion Camera
The instrument PICAM is an ion mass spectrometer operating as an all-sky camera for charged particles to study the chain of processes by which neutrals are ejected from the soil, eventually ionised and transported through the environment of Mercury.
PICAM 3 - Planetary Ion Camera for the BepiColombo Mercury Planetary Orbiter
The instrument PICAM combines the features of an ion mass spectrometer with imaging capabilities for charged particles that will allow to study the chain of processes by which neutrals are ejected from the soil, eventually ionised and transported through the environment of Mercury. As a result one will better understand the formation of Mercury's tenuous atmosphere and the plasma within the cavity encompassed by its magnetic field.
PIK - Support in Crisis Situations
The fact that organizations involved in emergency relief (ambulance, fire brigade, police) are not electronically connected and cannot access common disposition services during a crisis complicates matters greatly.The project PIK addresses these challenges by developing new components and improving existing elements