Projects within the framework of open4innovation
There are 2455 results.
ACube4Floods
Flood Event Monitoring and Documentation enabled by the Austrian Sentinel Data Cube
ADAM - Analytical Nonlinear Damper Modelling
The ADAM project was aimed at investigating the case that both the damping rate and the spring rate are non-linear and a function of the deflection, and that the damping rates and eigenfrequencies of the damper and the adjacent structure are different. This involved the development of a transient, non-linear finite element analysis model and correlation with a non- linear test specimen, a cable shock damper presenting highly non-linear behaviour.
ADECELL - The future of solar cells with improved light management
A new generation of solar cells and modules significantly increase efficiency. This is made possible by a technology developed to enable flexible, low-cost manufacturing of embossing tools for optimal surface structuring.
ADEQUATe – Analytics & Data Enrichment to improve the Quality of Open Data
Improved Data create Added Value. Innovative approaches for increasing the quality of open data.
ADEX - Autonomous Driving Examiner
The ADEX project aims to develop an examination method for automated driving. At the core of this approach is an autonomous examiner, i.e., a programme unrelated to the specific design of the autonomous-driving controller being tested.
AFOM - Automatic failure and optimisation analysis by data-acquisition
In the project, methods will be developed for analysing measured value curves to detect changes in operation or failures in the system. By integrating BIM data of buildings, corresponding models will be generated to validate the heating, ventilation, and air conditioning (HVAC)-networks, which will be used for analysis.
AGETOR
AGETOR is a KIRAS-project to improve safety at major events. Movements of persons are analysed using big data sources (mobile communications and social media).
AGelFa - Development of surface structurable final-coating stucco systems on high-performance heat-insulating aerogel insulation plaster for historic building facades.
High-performance insulating plaster systems represent an important option toward improving the thermal insulation of historic buildings without changing their physical appearance. The high-performance aerogel insulation plaster has recently become available for deployment. In this context, the present will explore final stucco systems suitable for building with structured surfaces.
AGreeNew - New biobased products of the agricultural biorefinery
AGreeNew aims to expand the product portfolio of the agricultural biorefinery. Sour whey, farm manure and green silage will be used as raw materials to produce biosurfactants, fertilizers and protein-rich animal feed. The production processes of these valuable products will be assessed in terms of sustainability and economic potential.
AI-driven decontamination technologies for repurpose/recycle to meet food-contact regulations using light (Light-AIClean)
The project aims to develop a chemometrics-assisted decontamination (DC) process for waste plastic with AI-driven quality control and a renewable energy-based DC technology. By utilizing visible light and a reusable catalytic system, it seeks to replace resource-intensive methods like hot water washing and gamma irradiation. AI techniques, including neural networks and reinforcement learning, will optimize efficiency, reducing resource use. The process will be tested in a photoreactor and automated DC setup, benefiting the recycling industry, AI developers, and environmental sustainability while promoting circular economy principles.
AI4Buildings - Artificial Intelligence for Digital Planning of Buildings
The quality of a digitally designed building is determined as early as the planning stage. It starts with a preliminary design, and extends to the detailed design of the architecture and building services.
AI4FM - Artificial Intelligence for Facility Management
AI-based anomaly and fault detection in buildings. Digital twins of buildings with simulation models for testing and optimizing rule-based fault detection methods. Mining of the recorded time-series data from existing Building Management Systems to train Machine Learning models for fault detection.
AI@Work
The AI@Work project developed a technical concept for optimized collaboration between humans and AI. Through the use of knowledge graphs and machine learning, a flexible solution was created that paved the way for the European project TEAMING.AI. This promotes an ethically sound, human-centered integration of AI into the workplace.
AIA4ALL - development of open, modular and automatable employer’s information requirements (EIR) and BIM execution plan (BEP)
The Employer's Information Requirements - EIR (German: AIA) - serves the client to define goals and use cases for a BIM-based construction project. The aim of this project is to create a modular, machine-readable AIA that can be seamlessly integrated into the tool landscape of openBIM projects. This is done by developing an open platform for creating use cases for the AIA.
AIDA – Affirmative Integrated Energy Design Action
The AIDA project aimed to increase the number of nearly-zero-energy-buildings, the number of building professionals trained on integrated energy design and the number of municipalities starting to build/refurbish buildings to nZEB levels.
AIFER – Artificial Intelligence for Emergency Response
The FFG KIRAS project AIFER focuses on the automated analysis and fusion of heteroge-neous mass data (EO image data, geo-social media data, geo-referenced news articles, Google Trends, etc.) using artificial intelligence (AI) as well as the transparent fusion of the derived information and their provision for civil protection.
AIM4X - Advanced INSAR Methods for TanDEM-X
The AIM4X project exploits the innovative capabilities of recent high-resolution SAR and radar altimeter missions.