Projects within the framework of open4innovation
There are 2505 results.
TANZ - Exploration of a regional living lab: Tourism as an opportunity for the energy transition in Pinzgau
Exploration for a regional living lab to accelerate Austria's climate neutrality in 2040 in the tourism region of Pinzgau. Based on numerous preliminary works, model solutions (“Realtests”) for the innovation fields of sector coupling, energy communities and sustainable heating solutions were designed, the organisational structure of the living lab is developed and stakeholders were actively involved.
TASTE - Traffic Assistant Simulation and Testing Environment
Simulated vehicles improve real traffic’s safety.
TCTM - Model Driven TC/TM Protocol Design
The TCTM project aimed to establish a single definition source for the TC/TM interface and to automatically generate the respective documentation, SRDB, flight software and test equipment software to reduce the NRE effort for future instrument developments.
TEA-PUMP – Techno-economic Analysis of Thermoelectric Modules for Efficiency and Performance Enhancement in Heat Pumps for Residential Buildings
The TEA-Pump project explores the innovative use of thermoelectric elements (TEM) in compression heat pumps to enhance their efficiency and performance. Through a comprehensive techno-economic analysis, promising heat pump (HP) configurations for use in urban multi-family housing are identified. The project makes a significant contribution to the decarbonization of heating and cooling supply and supports the development of climate-neutral cities through energy-efficient, future-oriented heat pump technologies.
TFlex - Temperature-flexibilisation in low-load operation of local district heating systems
Within the research project TFlex it was checked if the losses adherent to small district heating networks during low-load periods can be reduced. One possible solution is by deactivating the network and supplying the customers from previously charged decentralized storages. The optimal clustering of the storages and the possibility of solar-charging the storage were calculated with the aim of a guaranteed one-hundred percent heat supply.
THECLA
THERM-opti-BALCONY-P2 - Thermal Optimized Renovation of Balconies Phase 2: In-Situ-Pilot-Station
Pre-cast cantilever balconies represent a particular problem in the case of thermal rehabilitation of buildings. With the THERM-opti-BALKON-System a solution is currently being investigated under laboratory conditions. Phase 2 aims to create an in-situ-pilot-station. The most important object of study is the long-term behavior of the THERM-opti-BALKON-System.
THERM-opti-BALCONY: Thermal Optimized Renovation of Balconies
Pre-cast cantilever balconies represent a particular problem in the thermal renovation of buildings. The central goal of this project is the development of practical and cost-effective mounting solutions for the thermally decoupled reconstruction of balconies on building frontages and achieving a significant increase in the energy performance of the thermal renovation measure.
THRUSTUP
Thrust Scale Up and Life Time Extension Methods of Catalysts for Green Propellant Attitude Control Thrusters
TM/TC Modem - Telemetry and Telecommand Modem and Interface Processing Equipment for EGSE and Ground Stations
This ASAP 8 project is designed to enhance the flexibility and functionality of our TT&C SCOE and Payload EGSE (Electrical Ground Support Equipment) solutions, but also to extend our business to the ground station area by elaborating the detailed requirements, system and detail design for a modem, both for EGSE and ground station systems. The concepts and design will be validated by practical investigations and evaluations.
TMIS - Topographic Mars Information System
One of the instruments on board of the European Mars Express Spacecraft is the HRSC (High Resolution Stereo Camera). The project group developed the topographic information system TMIS - arelational spatial data catalogue - for managing, archiving and distributing the captured images.
TMIS.ascrea - Automatic Selection, Categorization and Recognition of Areomorphic Features
The project focused on an automated areomorphic (i.e. Mars-related morphological) analysis based on DTM data. Automation has become inevitable due to the large amount of available data.
TMIS.morph - Areomorphological Analysis of Data from HRSC on Mars Express
TMIS.morph, a project in the sequence of TMIS (Topographic Mars Information System) projects, was the Austrian contribution to the international collaboration of “HRSC (High Resolution Stereo Camera) on MEX”, lead by Professor Gerhard Neukum (FU Berlin). The TMIS projects, beside providing a solid data management background of the huge datasets of the HRSC imagery and the derivative digital terrain models (DTMs) for the scientific research team, aimed at unconventional visualization, evaluation and automated extraction of selected Martian topographic features.
TMIS.plus.II - Maintenance and Extension of the Topographic Mars Information System (TMIS) and Processing and Analysis of Terrain Information from Mars Derived from HRSC Imagery
TMIS has recently been re-implemented and contains data covering some three quarters of the planet's surface. Besides maintaining the data catalogue, I.P.F. also uses the Mars DTM data for research activities in DTM analysis. In the course of the current project the focus is on areomorphologic analysis, in particular on generating highly informative visualisations.
TOPOS
The objective of TOPOS is to develop a tool to measure general trends of subjectively perceived security in any given region. This tool will also help to identify perceived hot spots in any neighbourhood
TOPS – Topology-optimised reinforced concrete slabs with digital formwork and reinforcement
The TOPS project is investigating material-efficient ribbed concrete slabs, which save up to 50% of the concrete used in conventional flat slabs by topology-optimisation. A 'file-to-factory' process enables the automated production of formwork and reinforcement using digital technologies. The construction method reduces CO₂ emissions and contributes to the decarbonisation of the construction industry.
TRADEMARKFarb&Stoff
From an idea to a trade product ready for marketing: Plant dyes for the textile industry.