Projects within the framework of open4innovation
There are 1242 results.
TFlex - Temperature-flexibilisation in low-load operation of local district heating systems
Within the research project TFlex it was checked if the losses adherent to small district heating networks during low-load periods can be reduced. One possible solution is by deactivating the network and supplying the customers from previously charged decentralized storages. The optimal clustering of the storages and the possibility of solar-charging the storage were calculated with the aim of a guaranteed one-hundred percent heat supply.
THERM-opti-BALCONY-P2 - Thermal Optimized Renovation of Balconies Phase 2: In-Situ-Pilot-Station
Pre-cast cantilever balconies represent a particular problem in the case of thermal rehabilitation of buildings. With the THERM-opti-BALKON-System a solution is currently being investigated under laboratory conditions. Phase 2 aims to create an in-situ-pilot-station. The most important object of study is the long-term behavior of the THERM-opti-BALKON-System.
THERM-opti-BALCONY: Thermal Optimized Renovation of Balconies
Pre-cast cantilever balconies represent a particular problem in the thermal renovation of buildings. The central goal of this project is the development of practical and cost-effective mounting solutions for the thermally decoupled reconstruction of balconies on building frontages and achieving a significant increase in the energy performance of the thermal renovation measure.
THRUSTUP
Thrust Scale Up and Life Time Extension Methods of Catalysts for Green Propellant Attitude Control Thrusters
TM/TC Modem - Telemetry and Telecommand Modem and Interface Processing Equipment for EGSE and Ground Stations
This ASAP 8 project is designed to enhance the flexibility and functionality of our TT&C SCOE and Payload EGSE (Electrical Ground Support Equipment) solutions, but also to extend our business to the ground station area by elaborating the detailed requirements, system and detail design for a modem, both for EGSE and ground station systems. The concepts and design will be validated by practical investigations and evaluations.
TMIS - Topographic Mars Information System
One of the instruments on board of the European Mars Express Spacecraft is the HRSC (High Resolution Stereo Camera). The project group developed the topographic information system TMIS - arelational spatial data catalogue - for managing, archiving and distributing the captured images.
TMIS.ascrea - Automatic Selection, Categorization and Recognition of Areomorphic Features
The project focused on an automated areomorphic (i.e. Mars-related morphological) analysis based on DTM data. Automation has become inevitable due to the large amount of available data.
TMIS.morph - Areomorphological Analysis of Data from HRSC on Mars Express
TMIS.morph, a project in the sequence of TMIS (Topographic Mars Information System) projects, was the Austrian contribution to the international collaboration of “HRSC (High Resolution Stereo Camera) on MEX”, lead by Professor Gerhard Neukum (FU Berlin). The TMIS projects, beside providing a solid data management background of the huge datasets of the HRSC imagery and the derivative digital terrain models (DTMs) for the scientific research team, aimed at unconventional visualization, evaluation and automated extraction of selected Martian topographic features.
TMIS.plus.II - Maintenance and Extension of the Topographic Mars Information System (TMIS) and Processing and Analysis of Terrain Information from Mars Derived from HRSC Imagery
TMIS has recently been re-implemented and contains data covering some three quarters of the planet's surface. Besides maintaining the data catalogue, I.P.F. also uses the Mars DTM data for research activities in DTM analysis. In the course of the current project the focus is on areomorphologic analysis, in particular on generating highly informative visualisations.
TWID - Heating-Paint Sensor Based Wing Ice Detector
In the scope of the TWID project, a method for reliable detection of ice on wing surfaces and other relevant structures on an aircraft is to be developed, examined and validated in the course of various tests on the small-scale and full-scale models in the icing wind tunnel. Ice detection combined with the de-icing method, which is already in development, results in a completely self-sufficient de-icing system, which independently identifies and reliably removes ice on the wings.
TWIN - Digital twins for sustainable buildings
Digital building twins have hardly been used in practice due to an often unfavourable cost-benefit ratio. The aim of the TWIN project is to bring together use cases of digital building twins with a high ecological and economic impact in order to prepare application scenarios with great implementation potential.
Technology Platform Photovoltaic Austria
Between research institutions and the economic system the way has been paved to initiate joint R&D projects. Common research activities have been initiated and intensified to be able to position local companies in international niche markets for photovoltaics.
Technology transfer for market introduction of multifunctional photovoltaic solar façade systems
Technology and know how transfer for market introduction of multifunctional photovoltaic solar façade systems. Constructional engineering, integration into the buildings´ energy system, economy. Design of an information website and accompanying target group work.
TelcoPTS - Generic Telecom Payload Test System
Test stand method for the determination of system efficiency and emission factors of small-scale biomass combustion systems
Determination of key data with practical relevance of typical applications in only one test run. Monitoring of air pollutants and efficiency and continuous improvement of technology possible with test stand method.
Testing the sustainable hospital.
Based on a feasibility study an interdisciplinary team of researchers supports hospital practitioners implementing the concept of sustainable development in a pilot hospital. Changes within three key areas should lead to significant improvements.
The Green Parking Space – Utilization of urban parking areas for production of biomass
Many traffic areas in urban environments are actually used as such only a small fraction of the time. Subject of this project was to investigate the possibility of using those areas by additional integration of photobioreactors for the production of biomass, integrating such systems to the maximum extent into the urban substance and energy cycles.
The Passive House Catalogue of Building details for renovations
"Building of Tomorrow" funded research reports dealing with building renovation will be analysed for solutions of construction details. This information will be supplemented with structural-physical descriptions, ecological ratings and technical discussions. All the information will be collected and systematically presented in a catalogue of building details for renovation.