Projects within the framework of open4innovation
There are 1230 results.
OttoWagner-ArealPlus - Feasibility study for a certified plus-energy-district-renovation of the listed Otto-Wagner-Area
Development of an innovative concept for the transformation of the Viennese Otto-Wagner-Area into a plus-energy-quartier while meeting requirements of cultural heritage management. The historic architectural jewel covers an area of around 50 hectares, consists of 70 buildings and a gross floor area of around 200,000 m². The solution meets highest energy efficiency standards and comfort requirements.
P2H-Pot - Potentials, economic feasibility and system solutions for Power-to-Heat
P2H-Pot has identified economically feasible potentials for Power-to-Heat (P2H) in urban regions. The suitability of different technical system configurations were investigated using thermodynamic simulation and considering experiences from Scandinavian cases. The assessment of short, medium and long term relevance and economic feasibility of P2H were accomplished by simulating model-based scenarios up to 2050 of the Austrian and German electricity and heat market. In cooperation with a district heating company three case studies have been carried out.
P2PQ - Peer2Peer im Quartier
The research project Peer2Peer im Quartier deals with applications optimizing the selfconsumption of PV-generated energy within urban quarters by enabling peer-to-peer relations among energy prosumers based on Blockchains. Aim is to develop and validate these applications in real operation.
PARTAC
Particle Accumulation in the JEREMI Experiment: Definition of Necessary Flow and Particle Parameters
PAT+ - Product Access Technology for Pléiades User Services
Pléiades is a French Earth Observation satellite program carried out in cooperation with Austria, Belgium, Italy, Spain, and Sweden. Pléiades has also achieved the status of a "GMES Contributing Mission". PAT+ is an innovative technology for online data access to the Pléiades Ortho Products covering large geographical areas.
PAT+3 - Product Access Technology for Pléiades User Services (Phase 3)
PAT+ is an innovative software technology for online data access to the Pléiades Ortho Products covering large geographical areas and will be supplied by EOX. A requirements analysis and design study was carried out in previous project phases jointly with the designated Pléiades data distributor, the French company Spot Image. The current status of this development (spring 2010) is that EOX have completed the detailed design and performed the operational readiness review jointly with Spot Image.
PEAR – Test facility for energy efficient automation and control of buildings
The energy demand calculated in the design phase often differs from measured values in the actual building operation. This projects reviews building automation and operation by presenting a solution how to assess energy efficiency of control strategies in the fields of air conditioning systems, concrete core activation and free cooling. The results are implemented in the demonstration building "Post am Rochus".
PEB - Plus-Energy-Office
An integrated technical energy plus office concept without additional building costs demonstrates the feasibility of such projects instancing a concrete office project with 50.000 m² floor area in Vienna with economical cost consideration.
PEQBacker: Integrated District Planning - Enabler on the way to a Plus-Energy District
Development of guidelines for the implementation of Plus-Energy District coordination units based on research of success factors, exploration of mission elements of existing structures and consultation of a broad stakeholder group with the goal of increasing the transformation of existing and emerging neighbourhoods toward Plus-Energy Districts.
PERM::ICE
Permafrost in Iceland - Climate Change Impact on Permafrost Development and Resulting Mass Movment Processes
PESI - Paradigm shift in urban energy systems through synergies with industry
Analysis of different options for the use of industrial surplus energies of various shapes (waste heat, waste water, waste) and renewable energy sources in the industrial sector (e.g. solar panels on roof surfaces) in adjacent urban areas, which act as an "energy sponge". Based on real consumption and availability data, a simulation model was created and opportunities for synergies were documented.
PH Office - Criterions for energy-efficient office buildings
The passive house standard and energy-efficient building technologies are getting increasingly important for office buildings, too. However, standardisation is not completed on the same level as known from the residential building sector. The project at hand brings in definitions and makes a suggestion on a standardised calculation method for office buildings in passive house quality.
PH-Academy - "Passive house of the future" Academy platform for knowledge transfer between building developers
Builders and developers of residential buildings in low energy and passive house standard were invited to an academically moderated direct exchange of experiences, to turn them into competent users of new technologies.
PHELICITI - A new generation of chips in 3D
A chip that combines the best of two worlds: intelligent electronics meets fast photonics.The one-chip solutions developed by PHELICITI are scalable and can be produced cost effectively.
PHplusCAD, IT-based efficient Passive house- and Plusenergy house-Planning
Elaboration and programming of a software that reduces effort and time consumption of Passive house and Plusenergy house planning. By developing direct interfaces between CAD-applications and PHplusCAD and interfaces between PHplusCAD and Passivhouse planning tools based on MS Excel the system could be improved and the related working processes alleviated.
PICAM - Planetary Ion Camera
The instrument PICAM is an ion mass spectrometer operating as an all-sky camera for charged particles to study the chain of processes by which neutrals are ejected from the soil, eventually ionised and transported through the environment of Mercury.
PICAM 3 - Planetary Ion Camera for the BepiColombo Mercury Planetary Orbiter
The instrument PICAM combines the features of an ion mass spectrometer with imaging capabilities for charged particles that will allow to study the chain of processes by which neutrals are ejected from the soil, eventually ionised and transported through the environment of Mercury. As a result one will better understand the formation of Mercury's tenuous atmosphere and the plasma within the cavity encompassed by its magnetic field.
PISA - Position Information System for Time- and Location-based Analysis
Within the scope of the project PISA a system will be developed which registers vehicles’ movements by utilizing GPS technology. At the same time, data about actual weather and road conditions (e.g. rainfall, ground temperature) are collected. Both are stored in a central database, which is connected to a geo-information system.
PLAISIR - Planning Innovation: Learning form socially innovative energy projects
PLAISIR analyses social innovation in energy projects located in peripheral region in order to understand their role in energy transition processes and to give recommendations for energy-oriented, endogenous regional development policy.