Projects within the framework of open4innovation
There are 1259 results.
HERMES - Digital drivers book integration into organization specific processes
The project aimed at designing, developing and testing a digital driver’s book including dedicated analysis software. Special attention was paid to ease integration into organisation specificprocesses. Easy data collection, analysis, and transferability were among the main project goals.
HEROES - Houses for Energy- and ResOurce Efficient Settlements
A simplified method will be developed for the calculation of environmental indicators for so far not considered building elements (eg. constructions, which are not thermally relevant and HVAC-components). The theoretical principles for the calculation of the primary energy demand and the CO2-Emissions for operating and raising a building will be harmonized.
HERSCHEL/PACS - The Austrian Participation in the ESA-Cornerstone Mission HERSCHEL: On-board Data Reduction and Compression
The Herschel Space Observatory (formerly know as FIRST, theFar Infra-Red Space Telescope), a cornerstone of ESA's Space Horizon 2000 programme, will for the first time facilitate the investigation of the far infrared and submillimetre radio regime of the electromagnetic spectrum, which is not accessible from the ground. In this wavelength range the primary research goals will be in the fields of stellar evolution, development of planetary systems, interstellar matter and the origin of galaxies.
HIPERBEAR 2.0 - A thin strand
A new manufacturing method based on belt-casting technology aims to meet the demand for more sophisticated slide bearings made from aluminum composites.
HIPERCUT - Protective layers undergo endurance testing
New coatings for metal cutting tools will extend their service life. Research has its eye on the entire process, right back to recovering the coating material.
HOLMES - GNSS based forest logistic management
Covering forest logistics enhanced by satellite-based navigation, the project aimed at developing a closed logistic system for wood industry based on satellite navigation technologies; optimisation of the dispositional and administrative tasks was the objective.
HOTSPOTS - Holistic thermographic screening of urban physical objects at transient scales
HOTSPOTS enables new insights and perspectives for city development. According to the project idea innovations in acquisition and sensing as well as densification of geo-referenced city related data are supplemented by novel processing chains in city data analytics. Driven by an integrated scientific approach we develop a novel method in the selection, evaluation and prioritization of infrastructural city development measures which is directly derived from sensed data hence reducing the risk of ad-hoc decisions or lack in impact.
HP3-PP - Development of the HP3 Permittivity Probe Onboard the ESA ExoMars Mission
The HP3 (Heat flow and Physical Properties Probe) instrument was developed to investigate the thermal, mechanical and electrical properties of soil. The permittivity probe (PP) within the HP3 instrument shall determine the electrical permittivity and conductivity of the soil adjacent to the sensor.
HPZ-Walls - High-performance exterior brick walls without additional thermal insulation
Sustainable multi-storey housing made of bricks can only be realised if the strength of thermally optimised vertical coring bricks is tripled. This is to be achieved by changing the hole pattern, namely by reducing the air gap from 8 to 4 mm. A success of the project will form the basis for the realisation of insulation-free, 8-storey residential and office buildings in brick construction.
HWRM - Hydrology and Water Resources Management – HWRM New Satellite Techniques for Hydrology and Water Management of Alpine Regions
The project supports the scientific preparations for the CoRe-H2O mission (COld REgions Hydrology High-resolutionObservatory).
Heat Harvest - Harvest of urban solar excess heat from buildings and surfaces to avoid summer overheating in cities
"Harvest" of solar urban excess heat from building surfaces, sidewalks, streets and squares to avoid urban heat islands by lying flat absorber pipes, which are then fed into geothermal probe storage tanks for later use as a source for heating buildings.
Heat supply of development areas through supplementary solar supported near heat nets
Evolution of technical solutions for modular open ended near heat nets for development areas that are realized in several configuration levels. Adjusted solar heat and biomass solutions are supposed to be defined by modular construction and decentralized integration.
Heli-Comfort
Adaptable power density coating for energy efficient heating of cockpit and cabin
High Performance Superinsulation for Long Term Vacuum Stability
Within this project Beyond Gravity wants to perform a research and development programme concerning specific thermal insulation for use in vacuum insulated double wall steel tank systems for storage of liquid gas as Helium or Hydrogen. Such tank systems shall be used e.g. in medical applications or hydrogen propelled cars. Hydrogen propelled cars may become important for the deployment of sustainable energy sources.
HighSens - Highly Versatile, New Satellite Sensor Applications for the Austrian Market and International Development
The objective of HighSens was to develop a software tool to generate highly accurate 3D information based on the Pléiades system for the production of multi-parameter information solutions needed in urban and forest mapping applications.
HighSensII
Highly versatile satellite sensor applications - the Future of Austrian‘s Earth Observation Satellite Service Capacity
HighTempCFK - Out with metal, in with CFC
The automotive and aircraft industry need materials that remain stable even at 600 degrees. An innovative CFC composite provides the solution and a replacement for metal.
Highlights of Factory of Tomorrow, presented on www.nawaro.com
Dissemination of the subprogram Factory of tomorrow's highlights in the field of biopolymer, composites and building material on www.nawaro.com (Information pool for biological materials). Additional current information about biological materials in articles on-line. Networking of relevant companies with the help of a cooperation forum and a database.