Projects within the framework of open4innovation
There are 463 results.
"BIO-VISION II"
At the predefined locations of a dairy in Upper Austria and a brewery in Lower Austria the demonstration units of biogas - fuel cell are to be planned in the detail. Therefore exact economical and technical investigations and documentations will be prepared. Important goals are optimized energetic integration and best economical solutions.
"Gasthermenersatz" - Modular heat pump with environmentally friendly refrigerant to replace natural gas-based heating systems in large-scale residential buildings
The project "Gasthermenersatz" aims at developing, manufacturing, and testing a functional prototype of a decentralized, sound-optimized heat pump solution with refrigerant circuit modules connected in series or parallel. This renewable technology is well-suited to replace existing natural gas-based heating systems in large-scale residential buildings and to pave the way to carbon-neutral cities.
"NAWARO-Peat" - Peat replacement products by regional renewable resources
Possibilities to stop the peat usage in horticulture by using renewable resources and biological wastes which are regional available. Efficient economical as well ecological solutions for the usage of alternatives to peat, development and testing of treatment technologies which are necessary to create such a substrate in laboratory and field scale.
"gugler! build & print triple zero" - Subproject 7: Integrated General Planning
The aim of the subproject 7 is to aggregate a "normal" general planning process with innovative additional services. In the spirit of integrated planning in the design a higher number of design parameters must be resolved. This is different to a classic planning process with linear and chronological lined up add ons.
"gugler! build & print triple zero" - subproject 5: Ecoeffective building
On the basis of the commercial building gugler with 2140 m² useable floor area existing and 3260 m² useable floor area to be built a concept for a 100% recyclable ecoeffective building will be developed.
"gugler! build & print triple zero" - subproject 6: Integration of the C2C production into the flagship project Gugler
Print and media production at the media and communications company gugler GmbH are currently being optimized according to Cradle to Cradle (C2C) criteria. The goal of this subproject is to allow the demands of a C2C production process optimized for exchange with biological cycles to be included into the general planning of the new production building of the company, a pilot project within the "building of tomorrow" program line.
"gugler! build & print triple zero" - subproject 9: Monitoring Gugler - Monitoring, evaluation, optimization GUGLER
The project objective is the measurement of relevant building values (energy consumption, ...), the evaluation of these values compared with the intended objectives and the optimization of the system based on the measured data. As a special innovation, monitoring the storage of alternatively generated electricity using photovoltaic and wind energy in the form of compressed air must be considered.
#EEG++ Digital Energy Communities Optimized
The project aims to develop an innovative energy system for plus-energy neighborhoods by integrating advanced photovoltaic installations, IoT technology, and energy communities to maximize the self-consumption of renewable energy while ensuring economic efficiency and user-centricity.
10., Rothneusiedl - climate model district Rothneusiedl: Preparation for the planned EU mission "New European Bauhaus"
Rothneusiedl will become a pioneering district for climate protection, climate adaptation and the circular economy. The existing RothNEUsiedl Charter outlines nine principles for making the district climate-friendly and inclusive. The dialogical and integrated process involves various target groups, including the planning and construction industry, future residents and businesses, in order to establish a local building culture at an early stage. NEB working principles are applied in order to support the parallel mission statement process.
2320climate-neutral - Climate-neutral Schwechat 2040
The City of Schwechat has been actively committed to climate protection for over 25 years and has been a member of the Climate Alliance since 1999. In 2023, it once again set strong climate protection signals with the adoption of guidelines for energy and climate protection funding. This commitment continues in 2024, with measures such as the mobility concept and the urban climate analysis.
3D*3B - 3D-Concret Printing, Reinforcement for low carbon and bending stressed structures.
The project is about 3D printed structural elements and their integration in building structures. The focus is predominantly set on bending stresses structural elements like panels and slabs. Results will point out technical, logistic and climate relevant aspects.
5th Gen HG - 5th Generation Heating Grid Neutal
In the 5th Gen HG project, an energy supply concept based entirely on renewable electricity and heat is to be developed for the municipality of Neutal in Burgenland and the neighbouring technology site. A newly designed 5th generation heating grid will form the local energy distribution backbone in the municipality. In addition to the technical and economic conceptualisation, the integration of local stakeholder requirements is a key feature of the project.
AFOM - Automatic failure and optimisation analysis by data-acquisition
In the project, methods will be developed for analysing measured value curves to detect changes in operation or failures in the system. By integrating BIM data of buildings, corresponding models will be generated to validate the heating, ventilation, and air conditioning (HVAC)-networks, which will be used for analysis.
AGelFa - Development of surface structurable final-coating stucco systems on high-performance heat-insulating aerogel insulation plaster for historic building facades.
High-performance insulating plaster systems represent an important option toward improving the thermal insulation of historic buildings without changing their physical appearance. The high-performance aerogel insulation plaster has recently become available for deployment. In this context, the present will explore final stucco systems suitable for building with structured surfaces.
AGreeNew - New biobased products of the agricultural biorefinery
AGreeNew aims to expand the product portfolio of the agricultural biorefinery. Sour whey, farm manure and green silage will be used as raw materials to produce biosurfactants, fertilizers and protein-rich animal feed. The production processes of these valuable products will be assessed in terms of sustainability and economic potential.
AI4FM - Artificial Intelligence for Facility Management
AI-based anomaly and fault detection in buildings. Digital twins of buildings with simulation models for testing and optimizing rule-based fault detection methods. Mining of the recorded time-series data from existing Building Management Systems to train Machine Learning models for fault detection.
AIA4ALL - development of open, modular and automatable employer’s information requirements (EIR) and BIM execution plan (BEP)
The Employer's Information Requirements - EIR (German: AIA) - serves the client to define goals and use cases for a BIM-based construction project. The aim of this project is to create a modular, machine-readable AIA that can be seamlessly integrated into the tool landscape of openBIM projects. This is done by developing an open platform for creating use cases for the AIA.
Abwärme_4_Kapfenberg - 100 % industrielle Abwärmeauskopplung Kapfenberg
The project aims to explore the feasibility of maximizing industrial waste heat extraction into the district heating system of the municipality of Kapfenberg to foster the defossilization path.
Altmünster 2040
The municipality of Altmuenster, one of the first Climate Alliance municipalities in Upper Austria and a long-standing member of the Climate and Energy Model Region Traunsteinregion (KEM), wants to develop a municipal climate strategy with clear options for action.
AnergieLeichtGemacht - Development of Scalable Implementation Models for Geothermal Anergy Networks to Decarbonize the Building Sector
The project develops standardized technical, organizational, and financial implementation models for anergy networks to enable sustainable heating solutions in cities and municipalities. By identifying suitable settlement typologies, analyzing existing framework conditions, and engaging stakeholders, scalable solutions are created. The goal is to reduce planning and implementation barriers and facilitate investments in local anergy networks.